PLME_4.1.ino: For Module 01M11V0 Basic Display on an LCD screen, State

August 24, 2021
| No Comments
[featured_image]
Download
Download is available until [expire_date]
  • Version
  • Download 245
  • File Size 3.99 KB
  • File Count 1
  • Create Date August 24, 2021
  • Last Updated April 29, 2024

PLME_4.1.ino: For Module 01M11V0 Basic Display on an LCD screen, State

This programme from https://controlduino.com/ runs on an Arduino UNO, MEGA and others,

Aim:

The aim of this program is to measure the %O2 data of a gas coming from the combustion, obtained from the lambda module (Controlduino 01M11V00), and represent it on the display LCD,
It also indicates the state of the lambda sensor if the measurement is invalid.

Hardware needed to use this software

• Arduino board
• Lambda module and wires (Controlduino 01M11V00)
• Wideband lambda probe
• Display (LCD1602) with (LCD I2C( controller)
• Power supply (V=12V, I>=2A)

Information:

On the website https://controlduino.com/ you can find all information about the Lambda modules and Shield and other modules.

library:

To use this software you need to have the "Lambda" library installed which can be downloaded from: https://controlduino.com/lambda-module-01m11v00/

Purchase:

You can purchase Lambda Shields and Lambda Modules, sensors and other modules from the shop at https://controlduino.com/store/.

Downloads:

In the following link you can download all arduino files, smartphone APPs, datasheets of the board and probes... :
https://controlduino.com/lambda-module-01m11v00/
Forum:
If you have any questions or want to share your projects, you can do it in the forum: https://controlduino.com/forum/

Display library:

The library for the LCD Display 1602 I2C module (“LiquidCrysta I2C" by Frank de Brabander, version 1.1.2) can be found at the following link:

https://github.com/johnrickman/LiquidCrystal_I2C

Enjoy