PLME_4.1.ino: For Module 01M11V0 Basic Display on an LCD screen, State

August 24, 2021
| No Comments
[featured_image]
Download
Download is available until [expire_date]
  • Version
  • Download 137
  • File Size 3.99 KB
  • File Count 1
  • Create Date August 24, 2021
  • Last Updated December 22, 2021

PLME_4.1.ino: For Module 01M11V0 Basic Display on an LCD screen, State

This program made by https://controlduino.com/ runs on an arduino UNO, MEGA and others,
Target:
The aim of this program is to measure the %O2 data of a gas coming from the combustion obtained from the lambda module (Controlduino 01M11V00) and display it on a the display LCD,
also shows the state you will be in when the measurement is invalid..

Hardware required to use this software:
• Arduino board
• Lambda module and wires.(Controlduino 01M11V00)
• Wideband lambda probe
• Display (LCD1602) with (LCD I2C( controller)
• Power supply (V=12v, I>=2A)
On the website https://controlduino.com/ you can find all the information about the lambda modules and Shield and other modules.
Library:
To use this software you need to have installed the "Lambda" library which can be downloaded at: https://controlduino.com/lambda-module-01m11v00/
Purchase:
In the store https://controlduino.com/store/ you can purchase, lambda shields and lambda modules, sensors, and other modules.
Downloads:
In the following link you can download all the arduino files, smartphone APPs, data sheets about the board, and probes... :
https://controlduino.com/lambda-module-01m11v00/
Forum:
If you have any questions or want to share your projects you can do it in the forum: https://controlduino.com/forum/

Enjoy