PLSME100.0.ino: Sets the date and time of the RTC.

May 7, 2025
| No Comments
[featured_image]
Download
Download is available until [expire_date]
  • Version
  • Download 331
  • File Size 53.15 KB
  • File Count 1
  • Create Date May 7, 2025
  • Last Updated May 7, 2025

PLSME100.0.ino: Sets the date and time of the RTC.

Target:

The purpose of this program is to set the time available on the computer at the time of compilation in the RTC (Real Time Clock) of the ’

"Datalogger Shield with MicroSD card and RTC, for lambda modules. Controlduino 91S00V00".

‘Note: In order for the RTC to keep the time when the board is not powered, the 3V CR232 battery must be left installed.

Hardware required to use this software:

  • Arduino board
  • Board "Controlduino 91S00V00, Datalogger Shield with MicroSD card and RTC, for lambda modules"
  • Power supply, Power supply via the USB connection that connects the computer to the Arduino.

Compatible with arduino boards

  • Arduino MEGA.(stackable),
  • Arduino UNO R4 minima.(stackable).
  • Arduino UNO R4 WIFI.(stackable).
  • Arduino UNO R3.(stackable)

Others.

It is recommended to load this program onto the Arduino with the board stacked, then disconnect the power supply, separate the board, and reprogram the Arduino with the following necessary program.